Q Is there a quality difference among the printing paper types?
R Yes, but it is only minimal and it is mostly visible in the lighter shades.
Q How is it apparent that the printing papers have different thicknesses?
R A thinner paper like Fotocal enhances the toner fixing procedure in the printer.
Q What is the ratio of toner and iron powder in the developer?
R Each printer has a specific blend with different ratios.
Q Are there quality differences between printers and copiers?
R The print quality of the Ricoh Aficio 820 and Aficio 430 is about the same.
Q Is it also possible to print large formats?
R This is only possible with the Ricoh Aficio 820/821. The maximum print width is 297x1250mm.
Q What temperature should the water used to decorate have?
R If Cover Coat is used, the water should be approximately 30 °C. If Lamination Paper is used, the water should be about 35-40 °C. In no case the water should be cold.
Q Should the white material (tile) be warmed up before the decoration?
R Yes, it is recommended, and a temperature of 20 ° C is optimal.
Q Is there a difference in the firing process if laminated paper or cover coat is used?
R Yes, when using laminated paper the firing process must be slower. In addition, a hold time at 70 ° C and a slower heat-up time between 70 ° C and 400 ° C should be performed.